 |
|
| 51PC101
fluorinated polyurethane anti-graffiti coatings |
Item
# 51PC101-001 |
| 51PC101
is a high-performance, highly fluorinated polyurethane top coat
formulated for thin film applications, offering general ease
of handling and application. It is a two-component, solvent
based, high solids enamel system which exhibits outstanding
performance properties, compared to higher build, multi-coat
premium systems. The patented “fluoroshield” protection
of 51PC101 makes it virtually impervious to moisture and oxygen
permeation. |
 |
| 51PC101
exhibits unsurpassed performance for all physical properties
as well as resistance to chemicals, weathering and uv degradation.
51PC101 contains a special “anti-graffiti” feature
making it resistant to graffiti attack. |
|
|
|
|
| This
light switch boxes are prime targets for tagging. This particular
box has been in service since the late 80's and has been tagged
and painted over many time. The box was stripped with Geo Strip
and then coated with 51PC101 anti-graffiti coating. Our Geo
Wipes are now used as a more cost effective method to control
graffiti. |
 |
A
high performance, inert topcoat system designed to overcoat
virtually any surface and make it resistant to corrosion, UV
breakdown, abrasion, graffiti and chemical attack. FPU®
coatings exhibit outstanding weathering characteristics. Developed
over two decades of research and development, FPU® has a
proven service history. 51PC101 is ideal for limited immersion
service on marine, aerospace, architectural, industrial and
automotive equipment, ferrous and non-ferrous metals, masonry,
timber, fiberglass and carbon fiber. It provides a high quality
fi nish, and offers exceptional all round performance with an
expected life span exceeding 20 years.
 |
Outstanding
Hydrophobic and Oleophobic surface properties |
|
Impervious
to moisture and oxygen permeation (Osmotic barrier) |
|
Highly
fl exible and outstanding impact and abrasion resistance |
|
Low
surface energy which resists soiling and marking |
|
Highly
resistant to attack by hydrocarbons and chemical products |
|
Completely
insensitive to UV radiation |
|
Highly
resistant to graffiti attack from spray paint and marker |
|
 |
| For
optimum appearance properties, 51PC101™ should be spray
applied in two to three coats to a minimum of 2 mils DFT / 50
microns DFT. Always allow each coat to “flash off”
to a tacked state prior to a following coat. 51PC101™
may also be spray applied, brushed or rolled in one coat, unreduced
to the recommended DFT. FPU® coatings must not be applied
to surfaces at ambient temperatures above 35C / 95F. For optimum
application properties, the temperature of the material should
be between 10C and 25C / 50F and 80F prior to mixing and application.
Apply the coating only when the surface temperature is more
than 5F or 3C above the dew point temperature of the surrounding
air and relative humidity is below 85%, in order to prevent
moisture condensation on the surface. |
|
Packaging: |
1.5
US gallon kit (5.67 litres) |
|
|
3
US gallon kit (11.34 litres) |
|
15
US gallon kit (56.7 litres) |
Labelling: |
51PC101
: UN 1263 Paint |
| |
|
Data
Sheet: |
|
|
|
|
